Panels are pieces of wood with a large surface area in relation to their thickness. Thanks to new technologies, boards can be manufactured in different formats, adapting to the needs of each use.
Solid finger jointed panels are made up of solid wood lamellas glued at the edges to form the final width of the piece. They are suitable for all uses in which solid wood is traditionally used, being the ideal product for worktops, stairs, furniture, decoration and other joinery work.
P5 and OSB 3 particle boards with humidity resistance and load-bearing capacity are commonly used in construction.
Solid edge glued panels are made up of whole lamellas glued together at the edges to form the panel. A convenient, fast and economical alternative to solid wood.
They are made of solid wood lamellas consisting of small pieces joined together at the end by finger-jointing, and then glued together at the edge.
Solid wood provides a natural feeling of warmth that no other material offers, especially in colder environments such as kitchens and bathrooms.
Solid wood panel consisting of three layers, two outer layers of 5mm full plank and the inner layer of 10 or 16mm finger-jointed oriented perpendicular to the outer layers, which gives this board great stability.
Each top is unique, no two are the same, and the wide variety of pieces available allows you to select the one that best fits your lifestyle and décor.
Particleboard with humidity resistance, tongue and groove 4-sided and suitable for structural use.
Wood chipboard, with waterproof properties, tongue and groove 4-sided and approved for structural use.
- Greater dimensional stability
- Larger dimensions
- High quality semi-finished product, ready to use
- Guaranteed moisture content
- Minimal waste and improved productivity
- Reduced stock levels
MUF, type 1 according to EN301
Class E1 according to standard UNE EN 13986
10 ± 2%
On the edge, not visible on the panel face
AITIM, FSC, PEFC
Individual plastic film for lengths over 2.000mm, optional for shorter lengths.